Instructions

Before starting, here are some important words that will help you understand the setting instructions of each watch.

Although, in many cases, customers value style over functionality, all watches need some settings to give you the best.

All watches have their own settings depending on its movement and by the way functionnalities they have at their disposal.

You might be wondering how to use them?

We are happy to show you all the details below, depending on the model you bought, or on which one you will be succumb.

In our example we want to set 17th at 13h30 (1:30pm)

To set the date, pull the crown in position 1 and rotate it counterclockwise until the day before, 16th for our example
To set the time, pull the crown in position 2 and rotate it clockwise until the desired time. If it's afternoon, you have to rotate 12 hours more, like in our example
Push the crown back in position 0

You can easily replace the bands by following these few steps

To remove the band simply push the spring and pull the right rod first
To put the band simply push the spring and insert the left rod first

For this part you will need a thin tool or a plastic lever

Open the loop with the logo
Unhook the bracelet
With the help of the tool you can unhook the buckle
Adjust the size to your wrist
Tighten the buckle in a slot provided for this purpose

This step is quite easy, it's the same way as standard watches

Pull the crown in position 1
Rotate it clockwise until the desired time

We advise you to go to a jeweler if you don't have the require tools or in case you aren't used to deal with

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement

To adjust the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement

To adjuste the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

We advise you to go to a jeweler if you don't have the require tools or in case you aren't used to deal with

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

In our example we want to set 17th at 13h30 (1h30 PM)

To set the date, pull the crown in position 1 and rotate it counterclockwise until the day before, 16th for our example
To set the time, pull the crown in position 2 and rotate it clockwise until the desired time. If it's afternoon, you have to rotate 12 hours more, like in our example
Push the crown back in position 0

You can easily replace the bands by following these few steps

To remove the strap simply push the spring and pull the right rod first
To put the strap simply push the spring and insert the left rod first

For this part you will need a thin tool or a screwdriver

Open the loop with the logo
Unhook the bracelet
With the help of the tool you can unhook the buckle
Adjust the size to your wrist
Tighten the buckle in a slot provided for this purpose

This step is quite easy, it's the same way as standard watches

Pull the crown in position 1
Rotate it clockwise until the desired time

We advise you to go to a jeweler if you are not used to handwork

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement.

To adjuste the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement.

To adjuste the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

We advise you to go to a jeweler if you are not used to handwork

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

In our example we want to set 17th at 13h30 (1h30 PM)

To set the date, pull the crown in position 1 and rotate it counterclockwise until the day before, 16th for our example
To set the time, pull the crown in position 2 and rotate it clockwise until the desired time. If it's afternoon, you have to rotate 12 hours more, like in our example
Push the crown back in position 0

You can easily replace the bands by following these few steps

To remove the strap simply push the spring and pull the right rod first
To put the strap simply push the spring and insert the left rod first

For this part you will need a thin tool or a screwdriver

Open the loop with the logo
Unhook the bracelet
With the help of the tool you can unhook the buckle
Adjust the size to your wrist
Tighten the buckle in a slot provided for this purpose

This step is quite easy, it's the same way as standard watches

Pull the crown in position 1
Rotate it clockwise until the desired time

We advise you to go to a jeweler if you are not used to handwork

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement.

To adjuste the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

After more than 48 hours without wearing the watch you will need to adjust the time and wind the movement.

To adjuste the time : pull the crown in position 1 and rotate clockwise until the desired time.
To wind the automatic movement : put the crown back in position 0 and rotate it clockwise until the round spring under the logo is tight (approx. 15-20 times).

We advise you to go to a jeweler if you are not used to handwork

With a fine tool push two pins in the direction of the arrow
Remove the desired number of meshes
Reinsert the rods in the opposite direction of the arrow

Do you need more help ?

Don't hesitate to contact us at any time if you need more help to set up your watch or for any request

Name

Message Send

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

VIP & 10% OFF

Confirm your age

Come back when you're older

Do you need more help ?

Suivez-nous sur les réseaux sociaux